Temperature And Door Alarm; Temperature Alarm; Switching The Temperature Alarm Off Early - Miele KFN 37692 iDE Operating And Installation Instructions

Temperature and door alarm

The appliance has been fitted with a
warning system which ensures that the
temperature in the freezer cannot rise
unnoticed and to avoid energy being
wasted if the door is left open.

Temperature alarm

If the temperature in the freezer section
becomes too warm, the sensor for the
freezer section will flash and at the
same time the alarm symbol  will
flash in the display. An alarm will also
sound.
The temperature the appliance is set at
determines the temperature the
appliance recognises as being too
warm.
Audible and visual signals will be
activated, for example,
– when the appliance is switched on if
the temperature in the appliance
differs greatly from the set
temperature,
– if a lot of room air enters the freezer
when food is being loaded, re-
arranged or taken out,
– when freezing large amounts of food
at once,
– when freezing fresh food which is still
warm,
– in the event of a power cut,
– if the appliance has a fault.
The alarm will stop and the the alarm
symbol  will go out when the
temperature reaches the correct level
again. The sensor for the freezer section
will light up again constantly.
32

If the temperature in the freezer
remains above -18 °C for a long
time, check that the frozen food has
not started to defrost.
If it has, check that the food is safe
to use and if it is, then use it as soon
as possible or cook it before freezing
it again.
Switching the temperature alarm off
early
If the noise disturbs you, you can
switch the alarm off if you wish.
 Touch the sensor for switching off the
temperature alarm.
The alarm will stop.
The alarm symbol  will remain
illuminated until the set temperature has
been reached.