Miele KFN 37692 iDE Operating And Installation Instructions page 8

Warning and Safety instructions

The more coolant there is in a refrigeration appliance, the larger
the room it should be installed in. In the event of a leakage, if the
appliance is in a small room, there is the danger of combustible
gases building up. For every 11 g of coolant at least 1 m
space is required. The amount of coolant in the appliance is stated
on the data plate inside the appliance.

To avoid the risk of damage to the appliance, make sure that the
connection data (fuse rating, frequency and voltage) on the data
plate corresponds to the household supply.
Check that this is the case before connecting the appliance. Consult
a qualified electrician if in any doubt.

The electrical safety of this appliance can only be guaranteed
when correctly earthed. It is essential that this standard safety
requirement is met. If in any doubt please have the electrical
installation tested by a qualified electrician.

Reliable and safe operation of this appliance can only be assured
if it has been connected to the mains electricity supply.

If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.

Do not connect the appliance to the mains electrical supply by a
multi-socket adapter or extension lead. These are a fire hazard and
do not guarantee the required safety of the appliance.

If moisture gets into electrical components or into the mains
connection cable, it could cause a short circuit. Therefore, do not
operate this refrigeration appliance in areas which are exposed to
moisture (e.g in a garage or utility room).

This appliance must not be used in a non-stationary location (e.g.
on a ship).

Do not use a damaged appliance. It could be dangerous. Check
the appliance for visible signs of damage.
8
3
of room