Miele KFN 37692 iDE Operating And Installation Instructions page 23

When the refrigerator section door is
opened, the interior lighting comes on
and the LED lighting on the adjustable
shelves becomes brighter until it
reaches its maximum brightness.
When the appliance is switched on for
the first time, the sensor control for the
freezer section and the alarm
symbol  will flash until the set freezer
temperature is reached.
When the set freezer temperature is
reached, the sensor control for the
freezer section lights up constantly and
the alarm symbol  goes out.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it. Do not
place food in the freezer until it has
reached the required coldness (at
least -18 °C).
Switching on and off
Individual settings can be set for each
section.
 Touch the sensor control for the
section you want to adjust the
settings for.
The sensor control that has been
selected is highlighted in yellow.
The SuperCool function can be
selected or the temperature can be
adjusted for the refrigerator section.
For the freezer section, the
SuperFreeze function can be selected
or the temperature can be adjusted.
Please refer to the relevant sections for
more information.
If another section is then selected, the
settings for the previously selected
section will remain unchanged.
23