Making Ice Cubes; Ice Cube Maker With Integrated Ice Cube Tray - Miele KFN 37692 iDE Operating And Installation Instructions

Making ice cubes

For the automatic ice-cube maker to
operate, it must be connected to a
mains water connection (see "Mains
water connection").

Danger to health!
The ice-cube maker and water
supply pipework must be rinsed:
– before using for the first time,
– if the ice-cube maker has not been
used for a long time,
– regularly when in continuous use
(at least once a month), to remove
ice residues from the system (to
avoid a blockage of the water supply
pipework) and
– before switching the ice-cube
maker off for a long time. See
"Cleaning and maintenance" –
"Rinsing the ice-cube maker" for
details of how to enable this
function.
Ice cube maker with integrated
ice cube tray
Only make normal domestic quantities
of ice cubes with the ice maker.
After using the appliance for the first
time, it can take up to 24 hours for the
first ice cubes to drop out of the ice-
cube maker and collect in the drawer.
After the ice-cube maker has been
turned off and on again, this process
lasts max. 6 hours.
54
In the ice-cube drawer  there is an
automatic ice-cube maker .
When the ice-cube maker is switched
on, the indicator light on the ice-cube
maker lights up.
Ice cubes can only be made when the
ice-cube drawer is completely closed.