Installing the appliance
Whilst counterholding adjusting bolts
with a screwdriver, tighten nuts
on the appliance door with ring
spanner .
Cover strip must be completely
hidden in the niche, and must not
protrude.
108
Drill holes in the furniture door and
fit screws . Make sure the two
metal edges are aligned (Symbol //).
Close the appliance door and the
furniture door.
- Depth adjustment (Z)
Loosen screws at the top of the
appliance door, and screw on the
fixing bracket at the bottom. By
moving the furniture door, create a
gap of 2 mm between the furniture
door and the housing unit.