Filter Replacement Indicator - Miele KFN 37692 iDE Operating And Installation Instructions

Filter replacement indicator 
The appliance is not supplied with
filters with holder KKF-FF (Active
AirClean). These are available to
purchase separately (see "Optional
accessories").
After fitting filters, the filter replacement
indicator has to be activated.
You will be reminded to replace the
filters after approx. 6 months (see
"Cleaning and Care - Replacing the
charcoal filters"). The  symbol will
light up in the display.
After replacing the filter(s), the counter
must be reset. The indicator will then go
out.
Activating the filter replacement
indicator or resetting the counter
 Touch the settings button.
All symbols available for selection will
appear in the display and the 
symbol flashes.
 Press the buttons for setting the
temperature ( or ) as often as
necessary until the  symbol
flashes.
Selecting further settings
 Press the OK button to confirm the
selection.
The most recently selected setting
flashes and the  symbol lights up in
the display.
 Touch  or  to make your selection
: Replacement indicator deactivated
1: Replacement indicator activated
2: Counter reset.
 Press the OK button to confirm the
selection.
The selected setting is applied, the
 symbol flashes.
 Touch the settings button to leave
settings mode.
Otherwise, the appliance electronics
will exit the settings mode
automatically after approximately one
minute.
39