Adjusting The Lcd Screen (Calibration) - Sony DCR-TRV950 Network Function Operating Instructions Manual

Maintenance information and precautions

Adjusting the LCD screen (CALIBRATION)

The buttons on the touch panel may not work correctly. If this happens, follow the
procedure below.
(1) Set the POWER switch to OFF (CHG).
(2) Eject the cassette from your camcorder, then disconnect any connecting cable
(3) Set the POWER switch to VCR while pressing DISPLAY/TOUCH PANEL on
(4) Follow the procedure below using an object such as the corner of a "Memory
CALIBRATE
Note
If you do not press the right spot,
corner. In this case, start from step 4 again.
238
from your camcorder.
your camcorder, then keep pressing DISPLAY/TOUCH PANEL for about five
seconds.
Stick" supplied with your camcorder.
You can use the supplied stylus for this operation (DCR-TRV950 only).
1 Touch at the upper left corner.
2 Touch at the lower right corner.
3 Touch in the middle of the screen.
CALIBRATE CALIBRATE
always returns to the position at the upper left
PB INDEX FN