Sony DCR-TRV950 Network Function Operating Instructions Manual page 111

Recording video or TV programs
Using the i.LINK cable
Simply connect the i.LINK cable (optional) to the DV Interface on your camcorder and
to DV OUT on the DV products. With a digital-to-digital connection, video and audio
signals are transmitted in digital form for high-quality editing.
(1) Insert a blank tape (or a tape you want to record over) into your camcorder,
and insert the recorded tape into the VCR.
(2) Set the POWER switch to VCR on your camcorder.
(3) Press z REC and the button on its right simultaneously on your camcorder,
then immediately press X on your camcorder.
(4) Press N on the VCR to start playback. The picture to be recorded appears on
the screen.
(5) Press X on your camcorder at the scene where you want to start recording
from.
3
REC
DV
DV OUT
: Signal flow
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
Using the Remote Commander
In step 3, press z REC and MARK simultaneously, then immediately press X. In step 5,
press X at the scene where you want to start recording from.
PAUSE
i.LINK cable (optional)
DV
111