Sony DCR-TRV950 Network Function Operating Instructions Manual page 131

Using a "Memory Stick" – Introduction
Selecting the still image quality
You can select the image quality in still image recording. The default setting is SUPER
FINE.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV950 only) or VCR.
Make sure that the LOCK switch is set to the further side (unlock position).
(2) Press MENU, then select STILL SET in
(p. 211).
(3) Turn the SEL/PUSH EXEC dial to select QUALITY , then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired image quality , then press
the dial.
1
POWER
LOCK
MEMORY/
NETWORK
MENU
with the SEL/PUSH EXEC dial
3
MEMORY SET
STILL SET
BURST
QUALITY SUPER FINE
IMAGESIZE FINE
RETURN STANDARD
REMAIN
[ MENU ] : END
4
MEMORY SET
STILL SET
BURST
QUALITY STANDARD
IMAGESIZE
RETURN
REMAIN
[ MENU ] : END
12
36
131