Sony DCR-TRV950 Network Function Operating Instructions Manual page 150

Superimposing a still image in the "Memory Stick" on an image
– MEMORY MIX
2
FN
To change the still image to be superimposed
Press –/+ on the right lower corner before step 6.
To cancel MEMORY MIX
Press
Notes
•You cannot use the MEMORY MIX for moving pictures recorded on a "Memory
Stick."
•When the overlapping still image has a large amount of white, the thumbnail image of
the picture may not be clear.
•You cannot change the mode setting. Press
Image data modified on your computer or shot with other equipment
You may not be able to play back modified images with your camcorder.
When you record the still image without superimposing
Select M. LUMI. mode. Press <-/+ mark> until all bars are displayed. Only the still
image will be displayed on the screen.
When you select M. OVERLAP
You cannot change the still image or the mode setting.
To record the superimposed image as a still image
Press PHOTO deeper in step 8 (You should set PHOTO REC in
menu settings beforehand).
150
OFF to return to PAGE1.
4
MEM MIX
MEM
CAMCM
– +
M I X
CHROM
5
MEM MIX
M. LUMI
–
6
MEM MIX
– +
M. LUMI
–
OFF to return to PAGE1.
8
POWER
MEMORY/
NETWORK
OFF MCCAM OVER- OK
LUMI LAP
MCCAM
Still image
CHROM
100–0001
– +
OFF OK
100–0001
+ – +
OFF OK
100–0001
+ – +
to TAPE in the