Sony DCR-TRV950 Network Function Operating Instructions Manual page 52

Recording still images on a tape – Tape Photo recording
Notes
•During tape photo recording, you cannot change the mode or setting.
•When recording a still image, do not shake your camcorder. If you do so, the image
may flutter.
•You cannot use PHOTO during the following operations: ( The
on the screen.)
– Fader
– Digital effect
•When you record images with the flash, sound may not be recorded clearly.
If you record a moving subject with the tape photo recording
When you play back the still image on other equipment, the image may flutter. This is
not a malfunction.
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
To use the tape photo recording during the tape recording
You cannot check an image on the screen by pressing PHOTO lightly. Press PHOTO
deeper. The still image is then recorded for about seven seconds, and your camcorder
returns to the standby.
To record clear still images with little unsteadiness
We recommend that you record on a "Memory Stick" using the Memory Photo
recording.
When you record images with the flash
The allowed shooting distance is shorter than when you record on a "Memory Stick" in
Memory Photo recording.
When playing back images recorded with the flash on other equipment
These images may flicker.
52
indicator flashes