Sony DCR-TRV950 Network Function Operating Instructions Manual page 151

Superimposing a still image in the "Memory Stick" on an image
– MEMORY MIX
Recording superimposed images on a "Memory Stick" as a still
image
Before operation
Insert a "Memory Stick" recorded still images into your camcorder.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV950 only). Make
sure that the LOCK switch is set to the further side (unlock position).
(2) Press FN and select PAGE2.
(3) Press MEM MIX. The last recorded or last composed image appears on the
lower part of the screen as a thumbnail image.
(4) Press –/+ on the right lower corner of the screen to select the still image which
you want to superimpose.
– : To see the previous image
+: To see the next image
(5) Press a desired mode. The still image is superimposed on the moving picture.
(6) Press –/+ on the left lower corner of the screen to adjust the effect, then press
OK to return to PAGE2.
M. CHROM:
M. LUMI:
C. CHROM:
The fewer bars there are on the screen, the stronger the effect.
(7) Press EXIT to return to FN.
(8) Press PHOTO deeper to start recording.
The image displayed on the screen will be recorded on the "Memory Stick."
Recording is complete when the bar scroll indicator disappears.
Blue chroma key (only blue background portion) to extract a
still image and superimpose it on a moving image
Brightness level used when extracting a still image and
superimposing it on a moving image
Blue chroma key (only blue background portion) to extract a
moving picture and superimpose it on a still image
151