Sony DCR-TRV950 Network Function Operating Instructions Manual page 214

Changing the default settings with the menu
Icon/item
TAPE SET
REC MODE
AUDIO MODE
qREMAIN
MIC LEVEL
Notes on the LP mode
•When you record a tape in the LP mode on your camcorder, we recommend playing
the tape on your camcorder. When you play back the tape on other camcorders or
VCRs, noise may occur in pictures or sound.
•When you record in the LP mode, we recommend using a Sony Excellence/Master
cassette so that you can get the most out of your camcorder.
•You cannot dub audio on a tape recorded in the LP mode. Use the SP mode for the
tape to be audio dubbed.
•When you record in the SP and LP modes on one tape or you record some scenes in
the LP mode, the playback picture may be distorted or the time code may not be
written properly between scenes.
Notes on AUDIO MODE
•You cannot dub audio on a tape recorded in the 16-bit mode.
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance
in AUDIO MIX.
214
Mode Meaning
z SP To record in the SP (Standard Play) mode
LP To increase the recording time to 1.5 times the
SP mode
z 12BIT To record in the 12-bit mode (two stereo sounds)
16BIT To record in the 16-bit mode (one stereo sound
with high quality)
z AUTO To display the remaining tape bar:
• For about eight seconds after a cassette is
inserted and your camcorder calculates the
remaining amount of tape
• For about eight seconds after N or
DISPLAY/TOUCH PANEL is pressed
ON To always display the remaining tape indicator
z AUTO Adjusts audio recording level automatically
MANUAL Adjusts audio recording level manually
POWER
switch
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA