Sony DCR-TRV950 Network Function Operating Instructions Manual page 189

Connecting your camcorder to your computer using the USB cable
– For Windows users
Making the computer recognize the camcorder
Viewing images recorded on a tape
Refer to page 190 for details on viewing "Memory Stick" images on your computer.
You need to install "PIXELA ImageMixer " to view images recorded on a tape on your
computer. Install it from the CD-ROM supplied with your camcorder.
To install and use this software in Windows 2000 Professional. You must be authorized
as Power Users or Administrators. For Windows XP Home Edition/Professional, you
must be authorized as Administrators.
(1) Turn on your computer and allow Windows to load.
If you are using your computer, close all running applications.
(2) Insert the supplied CD-ROM into the CD-ROM drive of your computer.
The application software starts up and the title screen appears. If the title
screen does not appear, double-click "My Computer" and then "ImageMixer"
(CD-ROM Drive). The application software screen appears after a while.
(3) Move the cursor to "PIXELA ImageMixer" and click.
The Install Wizard program starts up and the "Select Settings Language"
screen appears.
(4) Select the language for installation.
(5) Follow the on-screen messages.
The installation screen disappears when installation is complete.
(6) Click DirectX
Follow the on-screen messages to install DirectX.
Restart your computer when the installation is completed.
(7) Connect the AC power adaptor to your camcorder.
(8) Set the POWER switch to VCR.
(9) Select USB STREAM in
(10) With the CD-ROM inserted, connect the USB jacks of the camcorder and
computer using the USB cable supplied with your camcorder.
Your computer recognizes the camcorder, and the Add Hardware Wizard
starts.
to ON in the menu settings (p. 215).
(USB) jack
Push into the end
USB connector
USB cable (supplied)
(continued on the following page)
189