Adjusting The Lcd Screen (Calibration) - Sony DCR-TRV80 Network Function Operating Instructions Manual

Troubleshooting

Adjusting the LCD screen (CALIBRATION)

If the buttons on the touch panel do not work correctly, follow the procedure below.
(1) Set the POWER switch to OFF (CHG).
(2) Eject the tape from your camcorder, then disconnect any connecting cable from
(3) Set the POWER switch to VCR while pressing DISPLAY/BATTERY INFO on
(4) Tap
Notes
•If you do not tap the right spot, you need to repeat step 4.
•You cannot calibrate the LCD screen when you close the LCD panel with the LCD
screen facing out.
For details of adjusting the LCD screen (CALIBRATION), refer to the operating
instructions supplied with your camcorder.
98
-GB
your camcorder.
your camcorder, then keep pressing DISPLAY/BATTERY INFO on your
camcorder for about five seconds.
displayed on the screen with the supplied stylus.
The position of changes.
CALIBRATE