Sony DCR-TRV950 Network Function Operating Instructions Manual page 106

Dubbing only desired scenes – Digital program editing (on tapes)
Operation 1: Making a program
(1) Insert the tape for playback into your camcorder, and insert a tape for
(2) Press MENU, then turn the SEL/PUSH EXEC dial to set VIDEO EDIT in
(3) Search for the beginning of the first scene you want to insert using the video
(4) Press MARK on the Remote Commander, or turn the SEL/PUSH EXEC dial to
(5) Search for the end of the first scene you want to insert using the video
(6) Press MARK on the Remote Commander, or the SEL/PUSH EXEC dial.
(7) Repeat steps 3 to 6, then set the program.
2
4
VIDEO EDIT
MARK
UNDO
ERASE ALL
START
EDIT SET
TOTAL 0 : 00 : 00 : 00
SCENE 0
[ MENU ] : END
106
recording into the VCR.
TAPE, then press the dial (p. 217).
operation buttons, then pause playback.
You can fine-adjust one frame at a time with EDITSEARCH.
select MARK, then press the dial.
The IN point of the first program is set, and the top part of the program mark
changes to light blue.
operation buttons, then pause playback. You can fine-adjust one frame at a
time with EDITSEARCH.
The OUT point of the first program is set, then the bottom part of the program
mark changes to light blue.
When the program is set, the program mark changes to light blue.
You can set up to 20 programs in maximum.
MENU
OTHERS
DATA CODE
BEEP
COMMANDER
DISPLAY
VIDEO EDIT READY
RETURN
[ MENU ] : END
N X 0 : 08 : 55 : 06
1 OUT
OTHERS
DATA CODE
BEEP
COMMANDER
DISPLAY
VIDEO EDIT RETURN
RETURN TAPE
MEMORY
[ MENU ] : END
6
VIDEO EDIT N X 0 : 09 : 07 : 06
MARK 2 IN
UNDO
ERASE ALL
START
EDIT SET
TOTAL 0 : 00 : 12 : 00
SCENE 1
[ MENU ] : END
0 : 08 : 55 : 06
VIDEO EDIT
MARK 1 IN
UNDO
ERASE ALL
START
EDIT SET
TOTAL 0 : 00 : 00 : 00
SCENE 0
[ MENU ] : END
7
VIDEO EDIT N X 0 : 10 : 01 : 23
MARK 4 IN
UNDO
ERASE ALL
START
EDIT SET
TOTAL 0 : 00 : 47 : 12
SCENE 3
[ MENU ] : END
to