Cisco EHWIC-4SHDSL-EA Configuration Manual page 74

dsl-group
Related Commands Command
controller shdsl
ima group
ima group clock-mode
ima group minimum-links
ima group shutdown
ima link
ima link add
ima link delete
ima link shutdown
efm-grp add
efm-grp delete
efm-grp minimum-links
shdsl annex
shdsl rate
show controller shdsl
efm-grp minimum-bandwidth Minimum bandwidth for group UP
efm-grp link-stability-timer
Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
74
Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
Description
Configures a controller for SHDSL mode and enters configuration
controller mode.
Defines physical links as IMA group members.
Sets the clock mode for an IMA group.
Minimum number of active links for group to be up.
Shuts down the IMA group.
Defines physical links in an IMA group.
Adds a link to the IMA group.
Deletes a link from the IMA group.
Shuts down a link in the IMA group.
Adds a link to the EFM bonding group.
Deletes a link from the EFM bonding group.
Minimum number of active links for group to be up.
Defines the SHDSL G.991.2 standard.
Defines the SHDSL rate.
Displays the status of the controller that is configured for SHDSL
mode.
Enables user to configure timer to introduce delay in UP and DOWN
stream data transmission.