Cisco EHWIC-4SHDSL-EA Configuration Manual page 47

Enhanced high-speed wan interface card
Table of Contents

Advertisement

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
Procedure 2
Step 1
Download the new firmware from the Cisco.com Software Center at:
http://software.cisco.com/download/release.html?i=!y&mdfid=284367038&softwareid=284942912&re
lease=1.7.5.0_11175002&os=UnixOrLinux.
Copy the firmware to the router's flash memory and specify the destination filename as
Step 2
shdsl_ea_IDC_DFE.pkg.
Update to the new firmware using one of the following methods:
Step 3
If shdsl_ea_IDC_DFE_.pkg is present in the router's flash memory, and the CLI filename is not set for
Note
the controller, the shdsl_ea controller PHY firmware will be loaded from shdsl_ea_IDC_DFE.pkg.
Determining the Firmware Version
In order to determine the version of the firmware that is currently running, execute the following
command and review the PHY source, PHY firmware files, the Integrated Device Control (IDC)
firmware version, and the DFE firmware version in the output:
show controllers SHDSL <slot>/<sub slot>/<port>
Router# show controller shdsl 0/1/0
Controller SHDSL 0/1/0 is UP
Execute the following command:
Router(config-controller)# firmware phy update
Proceed phy firmware update with shdsl_ea_IDC_DFE.pkg? [yes/no]:
When you are prompted to confirm whether to proceed with the firmware update, enter yes to
proceed.
Save and reload the router to pick up the new firmware.
Hardware is EHWIC-4SHDSL-EA, rev 0 on slot 0, hwic slot 1
Capabilities: EFM: 2-wire, EFM-Bond, Annex A, B, F & G
ATM: 2-wire, Mpair, IMA, Annex A, B, F & G
CPE termination
cdb=0x384330F0, plugin=0x21A5579C, ds=0x21A557E8 base=0x10200000
FPGA Version is A14
NPU Source: System
NPU Firmware version: SHDSL_EA_FW_20130315110446
Vendor: Infineon, Chipset: SOCRATES-4e
PHY Source: flash:
PHY Firmware files: IDC_1.7.2.6_DFE_FW_BETA_120111A.pkg
IDC Firmware version: 1.7.2.6
DFE Firmware version: FW_BETA_120111A
Firmware reload mode: Auto
Group is not configured
Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
Firmware Update
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents