Cisco EHWIC-4SHDSL-EA Configuration Manual page 55

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
Annex F and G (16 TC-PAM)—2304 to 3840 kbps
•
Annex A to F, and B to G (32 TC-PAM)—768 to 5696 kbps
•
Annex A to F, and B to G (16 TC-PAM)—192 to 3840 kbps
•
DSL Group with 2 Pairs
Annex A and B— 384 to 4608 kbps
•
Annex F and G (32 TC-PAM)—1536 to 11392 kbps
•
Annex F and G (16 TC-PAM)—4608 to 7680 kbps
•
Annex A to F, and B to G (32 TC-PAM)—1536 to 11392 kbps
•
Annex A to F, and B to G (16 TC-PAM)—384 to 7680 kbps
•
DSL Group with 3 Pairs
• Annex A and B— 576 to 6912 kbps
• Annex F and G (32 TC-PAM)— 2304 to 17088 kbps
Annex F and G (16 TC-PAM)— 6912 to 11520 kbps
•
Annex A to F, and B to G (32 TC-PAM)— 2304 to 17088 kbps
•
Annex A to F, and B to G (16 TC-PAM)— 576 to 11520 kbps
•
DSL Group with 4 Pairs
Annex A and B— 768 to 9216 kbps
•
Annex F and G (32 TC-PAM)— 3072 to 22784 kbps
•
Annex F and G (16 TC-PAM)— 9216 to 15360 kbps
•
Annex A to F, and B to G (32 TC-PAM)— 3072 to 22784 kbps
•
• Annex A to F, and B to G (16 TC-PAM)— 768 to 15360 kbps
EFM-Bonding 4 Pairs
The following enhanced rates are supported for the EFM-bonding 4 pairs:
Annex F and G (128 TC-PAM)— 9248 to 61216 kbps
•
Annex F and G (64 TC-PAM)—9216 to 50944 kbps
•
Annex A to F, and B to G (128 TC-PAM)— 800 to 61216 kbps
•
Annex A to F, and B to G (64 TC-PAM)— 768 to 50944 kbps
•
For EFM and Inverse Multiplexing Over ATM (IMA) bonding configuration with multiple links, Group
Data rate will be the summation of different link rates. Group Data rate falls in one of the above DSL
group ranges based on the annex and TC-PAM; different links may train at different rates.
In case of CPE annex and coding that is dependent on the configuration during the termination at the
Note
CO, select the standard rate at par with the configuration during the termination at the CO.
If the CO is configured for Lantiq extensions (128 or 64 coding or extended rate), the CPE lines may not
Note
train with the rate configured in the CPE. This CO rate is configured for enhanced rates, as specified
above.
Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
shdsl rate
55