Cisco EHWIC-4SHDSL-EA Configuration Manual page 53

Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
Related Commands Command
dsl-group
show running-config
Loop Attenuation alarm: none
Termination: CO, Line mode: 2-wire, Annex: F
Line coding: 32-TCPAM
Configured/actual rate: AUTO/5696 kbps
Modem status: UP_DATA_MODE,Condition: GHS_TRANSFER_
Reason: ERR_UNUSED_
Description
Creates and configures a DSL group.
Displays the contents of the currently running configuration file or the
configuration for a specific class map, interface, map class, policy map, or
VC class.
Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
shdsl annex
53