Cisco EHWIC-4SHDSL-EA Configuration Manual page 20

Configuring Cisco G.SHDSL EFM/ATM
DETAILED STEPS
Command
Step 1
For EHWICs:
controller shdsl slot number/subslot number/0
Example:
Router(config)# controller shdsl 0/2/0
Router(config-controller)#
For C888EA fixed platform:
controller shdsl slot number
Example:
Router (config)# controller shdsl 0
Router (config-controller)#
Step 2
mode atm
Example:
Router(config-controller)# mode atm
Router(config-controller)#
Step 3
For M-pair:
dsl-group DSL_group_number pairs link m-pair
Example:
Router(config-controller)# dsl-group 0 pairs 0-1
m-pair
Router(config-controller-dsl-group)#
For IMA:
dsl-group DSL_group_number pairs link ima
Example:
Router(config-controller)# dsl-group 0 pairs 0-1
ima
Router(config-controller-dsl-group)#
Step 4
shdsl rate {number | auto}
Example:
Router(config-controller-dsl-group)# shdsl rate 2048
Router(config-controller-dsl-group)#
For more information, refer to the
section on page
Examples
The examples in this section show how to configure bonding groups in the ATM mode on the Cisco
EHWIC-4SHDSL-EA, or on the C888EA. The examples include:
•
•
Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
20
"Command Reference"
49.
Configuring an M-pair bonding DSL group on a Cisco EHWIC-4SHDSL-EA
Configuring an M-pair bonding DSL group on a C888EA
Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
Purpose
Selects the controller and enters config-controller
mode.
See the "controller shdsl" section on page 68
more information.
Selects the ATM mode.
For M-pair:
Creates an M-pair bonding DSL group and
enters config-controller-dsl-group mode.
For IMA:
Creates an IMA DSL group and enters
config-controller-dsl-group mode.
See the "dsl-group" section on page 70
more information.
Defines the SHDSL rate.
for
for