De-Installation Of The Base From The Car; Adjustment For Sitting And Reclining - CYBEX gold SIRONA M2 i-Size User Manual

7 5
28
6
9
14

DE-INSTALLATION OF THE BASE FROM THE CAR

Carry out the installation steps in the reverse order.
• Unlock both ISOFIX connectors (7) through pushing the
buttons (5 and 6) simultaneously and pull them out of
the ISOFIX connect guides.
• Push the connectors (7) back into the original position.
• By pressing the adjustment handle (9) you can push
back the supporting leg into its original position and then
fold it back to save space.

ADJUSTMENT FOR SITTING AND RECLINING

CYBEX SIRONA M2 i-Size offers up to five different
sitting and reclining positions for the safe and comfortable
transport of your child in the car. If wanted, activate the
position adjustment handle (14) on the front of the child
seat, to put the CYBEX SIRONA M2 i-Size in the required
reclining positions. Always make sure that the seat shell
locks into place with an audible „CLICK".
NOTE! Newborns and infants who are not yet able to sit up
by themselves (up to around 1 year) should, for orthopedic
and safety reasons, always be transported in the flattest
recline position rearward-facing.
!
WARNING! For safety reasons adjusting between
sitting and reclining positions during travel is strictly
prohibited!