Removing The Right Power-Adapter Port; Prerequisites; Procedure - Dell Alienware Area-51m Service Manual

Removing the right power-adapter port

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the base cover.
2 Remove the battery.
3 Remove the memory
4 Remove the wireless
5 Remove the solid-state
6 Remove the rear-I/O
7 Remove the computer
8 Remove the right power-adapter
9 Remove the graphics
10 Remove the processor.
11 Remove the system board.

Procedure

Disconnect the left power-adapter port cable from the system board.
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
modules.
card.
drive.
cover.
base.
port.
card.
computer. After working inside your computer, follow the instructions
83