Removing the hard drive
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in
After working inside your
www.dell.com/regulatory_compliance.
CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
CAUTION: To avoid data loss, do not remove the hard drive while the computer is in sleep or on state.
Prerequisites
Remove the
base
cover.
Procedure
1
Using the pull tab, disconnect the hard-drive cable from the system board.
2
Remove the hard-drive cable from the routing guides on the computer base.
3
Remove the four screws (M2.5x5) that secure the hard-drive assembly to the palm-rest assembly.
4
Lift the hard-drive assembly along with its cable off the palm-rest assembly.
34
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
computer. After working inside your computer, follow the instructions