Replacing The Left Power-Adapter Port; Procedure; Post-Requisites - Dell Alienware Area-51m Service Manual

Replacing the left power-adapter port

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Procedure

1 Route the right power-adapter port cable under the left power-adapter port cable and place both power-adapter ports
into the slots on the palm-rest assembly.
2 Connect the right power-adapter port cable to the system board.
3 Slide and place the power-adapter board bracket on the palm-rest assembly.
4 Replace the screw (M2x3) that secures the power-adapter port bracket to the palm-rest assembly.

Post-requisites

1 Replace the heat-sink
2 Replace the computer
3 Replace the rear I/O cover
4 Replace the wireless
5 Replace the solid-state drive
6 Replace the battery.
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
assembly.
base.
card.
(in SSD1 slot).
computer. After working inside your computer, follow the instructions
67