Dell Alienware Area-51m Service Manual page 103

General-System Information
Maximum Clock Speed
Processor L2 Cache
Processor L3 Cache
HT Capable
64-Bit Technology
Device Information
SATA-0
SATA-1
M.2 PCIe SSD-0
M.2 PCIe SSD-1
Video Controller
dGPU Video Controller
Video BIOS Version
Video Memory
Panel Type
Native Resolution
Audio Controller
Wi-Fi Device
Bluetooth Device
Battery Information
Boot Sequence
Boot Sequence
Boot List Option
Advanced Boot Options
Enable Legacy Option ROMs
Enable UEFI Network Stack
Enable Attempt Legacy Boot
UEFI Boot Path Security
Date/Time
Table 4. System setup options—System Configuration menu
System Configuration
SATA Operation
Drives
SMART Reporting
USB Configuration
Enable Boot Support
Displays the maximum processor clock speed.
Displays the processor L2 Cache size.
Displays the processor L3 Cache size.
Displays whether the processor is HyperThreading (HT) capable.
Displays whether 64-bit technology is used.
Displays the M.2 SATA SSD-0 device information of the computer.
Displays the M.2 SATA SSD-1 device information of the computer.
Displays the M.2 PCIe SSD-0 device information of the computer.
Displays the M.2 PCIe SSD-1 device information of the computer.
Displays the video controller type of the computer.
Displays the discrete graphics information of the computer.
Displays the video BIOS version of the computer.
Displays the video memory information of the computer.
Displays the Panel Type of the computer.
Displays the native resolution of the computer.
Displays the audio controller information of the computer.
Displays the wireless device information of the computer.
Displays the bluetooth device information of the computer.
Displays the battery health information.
Displays the boot sequence.
Displays the available boot options.
Enable or disable the Legacy Option ROMs.
Enable or disable the UEFI Network Stack.
Enable or disable Legacy Boot.
Enable or disable the system to prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 boot menu.
Displays the current date in MM/DD/YY format and current time in
HH:MM:SS AM/PM format.
Configure operating mode of the integrated SATA hard drive controller.
Enable or disable various drives on board.
Enable or disable SMART Reporting during system startup.
Enable or disable booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.
103