Replacing The Speakers; Procedure; Post-Requisites - Dell Alienware Area-51m Service Manual

Replacing the speakers

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Procedure

NOTE: If the rubber grommets are pushed out of the speakers when removing the speakers, push them back in place
before replacing the speakers.
1 Using the alignment posts and rubber grommets, place the right speaker in the slot on the palm-rest assembly.
2 Holding the tab on the right speaker, rotate the right speaker into place and secure it using the alignment posts.
3 Route the speaker cable through the routing guides on the palm-rest assembly.
4 Using the alignment posts and rubber grommets, place the left speaker in the slot on the palm-rest assembly.
5 Holding the tab on the left speaker, rotate the left speaker into place and secure it using the alignment posts.
6 Connect the speaker cable to the system board.

Post-requisites

1 Follow the procedure from step 4 to step 7 in
2 Replace the solid-state drive
3 Replace the battery.
44
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
(in SSD2 slot).
computer. After working inside your computer, follow the instructions
Replacing the hard drive.