Removing the wireless card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in
After working inside your
www.dell.com/regulatory_compliance.
Prerequisites
Remove the
base
cover.
Procedure
1
Locate the wireless card on your computer.
2
Remove the screw (M2x3) that secures the wireless-card bracket to the system board.
3
Slide and remove the wireless-card bracket from the wireless card.
4
Slide and remove the wireless card from the wireless-card slot.
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
computer. After working inside your computer, follow the instructions
25