Power-Adapter Port; Removing The Power-Adapter Port - Dell Alienware x16 R2 Owner's Manual

Steps
1. Align and place the graphics-card fan into the slot on the palm-rest and keyboard assembly.
2. Connect the graphics-card fan cable to the system board.
3. Replace the two screws (M2x4) that secure the graphics-card fan to the palm-rest and keyboard assembly.
4. Route the speaker cable and the antenna cable through the routing guides on the bottom of the graphics-card fan.
Next steps
1. Install the base cover.
2. Follow the procedure in

Power-adapter port

Removing the power-adapter port

CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the rear I/O-cover.
About this task
The following images indicate the location of the power-adapter port and provide a visual representation of the removal procedure.
82
After working inside your
Before working inside your
computer.
computer.