Installing the battery connector
1.
Install the battery connector board on the computer.
2.
Secure the battery connector to the computer by using the screws.
3.
Connect the battery connector cable to the slot on the system board.
4.
Install the:
a.
base cover
b.
battery
5.
Follow the procedure in
Hard drive
Removing the hard drive
1.
Follow the procedure in
2.
To remove the hard drive:
CAUTION: Turn off the computer before you remove the hard drive.
a. Unlock the hard drive press latch door and lift it up to open it.
b. Release the hard drive by pressing the blue hard drive release latch [1].
c. Pull the hard drive out of the computer using the hard drive pull loop [2].
22
After working inside your
Before working inside your
computer.
computer.