Back Cushion 1 - Exerpeutic 900XL Owner's Manual

7a. Removing Hardware - Remove eight Bolts (21) and eight Washers (58) from the back of the
Seat and Back Cushions (7, 8). Remove bolts with the Multi Hex Tool with Phillips Screwdriver
provided.
7b. Installing the Seat and Back Cushion - Attach the Seat and Back Cushions (7, 8) onto the
Back and Seat Support Bracket (1) with eight Bolts (21) and eight Washers (58) that were removed.
Tighten bolts with the Multi Hex Tool with Phillips Screwdriver provided.
ASSEMBLY
16
Tool:
Multi Hex Tool with Phillips
Screwdriver