Exerpeutic 900XL Owner's Manual page 17

ASSEMBLY
Tool:
Multi Hex Tool with Phillips
Screwdriver
STEP 6
6a. Removing Hardware- Remove eight Bolts (23) and eight Washers (24) from the Back/Seat
Support Bracket (1) and Seat Sliding Tube (15). Remove bolts with the 6mm Allen Wrench
provided.
6b. Installing the Console -- Connect the Extension Wires (63) and Extension Sensor Wire (64)
to the wires that come from the Console (9). Tuck wires into the Front Handlebar Post
(6).Attach the Console (9) onto the top end of the Front Handlebar Post (6) with four Bolts (39)
that were removed. Tighten bolts with the Multi Hex Tool with Phillips Screwdriver provided.
15