Viewing Recordings On Tv; If Your Tv Or Vcr Is A Monaural Type - Sony Handycam DCR-DVD100E Operating Instructions Manual

Viewing recordings on TV

Connect your camcorder to your TV with the A/V connecting cable supplied with your
camcorder to watch playback pictures on the TV screen. You can operate the video
control buttons in the same way as when you monitor playback pictures on the LCD
display. When monitoring playback pictures on the TV screen, it is recommended that
you power your camcorder from a wall socket using the AC adaptor (page 18). Refer to
the operating instructions of your TV.
Open the jack cover. Connect your camcorder to the TV using the A/V connecting cable
supplied with your camcorder. Then, set the TV/VCR selector on the TV to VCR.
If your TV is already connected to a VCR
Connect your camcorder to the LINE IN input on the VCR using the A/V connecting
cable supplied with your camcorder. Set the input selector on the VCR to LINE.

If your TV or VCR is a monaural type

Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR or the TV. If you connect the
white plug, the sound comes from the L (left) signal. If you connect the red plug, the
sound comes from the R (right) signal.
If your TV or VCR has a 21-pin connector (EUROCONNECTOR)
Use the 21-pin adaptor supplied with your camcorder.
This adaptor is exclusive to an output.
The models with
62
-GB
S VIDEO
AUDIO/VIDEO
A/V connecting cable
(supplied)
: Signal flow
mark printed on their bottom surfaces only.
INPUT
Yellow
S VIDEO
VIDEO
AUDIO
Red
White
TV
Switch the TV
input to LINE.
TV