Step 2 Opening The Lcd Screen - Sony Handycam DCR-DVD100E Operating Instructions Manual

Step 2 Opening the LCD screen

LCD screen is used for such as changing settings, shooting images in various angles,
and reviewing recorded images.
OPEN button
1
Open the LCD screen while pressing OPEN.
2
Adjust the direction of the LCD screen to the desired position.
When you adjust the angle of the LCD screen, make sure if the LCD screen is
opened up to 90 degrees.
You can turn the LCD screen over and move it back to the camcorder body
with the LCD screen facing out as shown below.
Rotate the LCD screen 180
degrees.
Notes
•When closing the LCD screen, set it vertically until it clicks, then swing it into the
camcorder body.
•When the LCD screen is moved back to the camcorder while recording or while in
standby to record, the screen backlight is fixed to the [BRT NORMAL].
2
180º
90º
90º
1
Move the LCD screen back
to the camcorder.
19
-GB