Sony Handycam DCR-DVD100E Operating Instructions Manual page 37

Shooting movies/still images
To select the still image quality
You can select the image quality for still image recording.
The default setting is [FINE].
1
Set the mode dial to
2
Press SETUP.
3
Select
4
Select [QUALITY] with v/V, then press ENTER.
The amount of recording data varies depending on the settings for image
quality.
5
Select the desired image quality with v/V, then press ENTER.
6
Press SETUP
The SETUP display disappears from the LCD display.
Image quality settings
Setting
FINE (FINE)
STANDARD (STD)
(Still).
MANUAL SET
PROGRAM AE
FLASH MODE
FLASH LVL
WHT BAL
[ SETUP ] : END
(CAMERA SET) with v/V, then press ENTER.
CAMERA SET
OFF
SELFTIMER
BURST
QUALITY
IMAGESIZE
N. S. LIGHT
RETURN
[ SETUP ] : END
CAMERA SET
SELFTIMER
BURST
QUALITY
FINE
IMAGESIZE STANDARD
N. S. LIGHT
RETURN
REMAIN
[2000]
[ SETUP ] : END
Meaning
Use this mode when you want to record high quality
images. Fine images are compressed to about 1/4.
This is the standard image quality level for your
camcorder. Standard images are compressed to about
1/10.
37
-GB