It is recommended that the start‐up kit be stored near the printer.
The start‐up kit includes the following:
• Customer Tool kit—Allen keys, screwdrivers, a mirror, a scraper, a
• Consumable items—wiping cloths, pink paper, transparencies and
• Parts and accessories for emergency maintenance of the printing
2.4 Noise Level
The noise level at a distance of 100 cm (39.4 in) from all sides of the printer
is lower than 70 dB while printing. Impact noise was not found.
DOC-04002
Objet Desktop 3-D Printer Site Preparation Guide
spatula and a loupe for regular operation and maintenance. The
tools are kept in a special pouch.
so on, to maintain the printer for approximately two years.
system.
7
Rev. D2