Server Workstation - Stratasys Objet24 V2 Site Preparation Manual

5.4 Server Workstation

The customer must provide a computer for the server workstation, with
the following minimum requirements:
Processor
Operating System
Graphics Card
Memory
Mouse and Keyboard USB type (at least 101/102-key keyboard)
CD/DVD ROM Drive
Hard-Disk Drive
Network Card
The above table lists the minimum hardware requirements for the server
workstation. The customer can use a computer with a faster and more powerful
processor, increased RAM and hard disk size, etc.
Other Requirements
• The server workstation must have a user with Administrator
• No additional programs (including antivirus software) should be
It is recommended that the server workstation be connected to the
customer's LAN before printer installation.
You control both the built-in printer computer and the server workstation with same
keyboard-monitor-mouse set by using a KVM switchbox. The switchbox is
provided in the printer Start-up Kit.
DOC-04002
Objet Desktop 3-D Printer Site Preparation Guide
Single Processor Pentium
memory
• Microsoft Windows XP
with Service Pack 2
• Microsoft Vista
• Microsoft Windows 7—Professional, Ultimate and
Enterprise versions only
Macintosh operating systems are not supported.
Supporting Open GL; 512 MB of memory
See recommendations below.
4 GB RAM
IDE CD/DVD ROM Drive
40 GB
Two 10/100 Mbps network cards
Table 6: Server workstation requirements
privileges.
installed on the server workstation.
®
4, 3.0 GHz; 512 KB cache
Professional (32 Bit only)
®
®
15 Rev. D2