5.5 Client Workstations
The server workstation specifications (listed in Table 6) are relevant for all
CAD and remote client workstations that send models to the printer, with
the exception of the following:
• Client workstations require a minimum of 2 GB RAM.
• Client workstations do not require a USB connection on the mouse
5.6 Network
A network connection is required near the server workstation.
The printing system enables printing from all workstations connected to the
customer's network. Therefore, during the site preparation, identify all such
workstations to ensure that each has the correct operating system and computer
specifications.
5.7 Heat Dissipation
Table 7 describes the heat dissipation of the system units.
Unit
Printer
Server workstation 450 W (1530 BTU)
DOC-04002
Objet Desktop 3-D Printer Site Preparation Guide
and keyboard.
Objet 3-D
printing
system
Figure 5–1 Network connection
Estimated Heat Dissipation
760 W (2600 BTU)
Table 7: Heat dissipation per unit
Point-to-Point
Crossed Network Cable
5 m (16' 5")
Printer
Server
computer
Workstation
16
To local network
Rev. D2