3 Shipment and Delivery
3.1 Shipping Information and Responsibility
The Stratasys distributor will arrange shipment to th e customer's facilities, as
indicated in the "ship to" part of the invoice. It is the customer's
responsibility to provide the distributor with detailed delivery
instructions. The customer is responsible for transporting the system to a
suitably prepared installation site. Stratasys- ‐ certified Customer Support
Engineers will advise the customer on site preparation, upon request.
Caution:
Equipment should be unpacked and installed by authorized Customer Support
Engineers only.
3.2 Shipping Pallets
The printer arrives on a wooden pallet. The pallet's approximate size and
weight appear in the following table:
W × H × D (cm)
104 × 87 × 79
W = Width; H = Height; D = Depth.
3.3 Equipment
It is recommended that a hand pallet truck with the following
specifications is available for printer installation:
• Capable of lifting 100 kg (220 lb)
• A 100‐centimeter (40‐inch) extension
DOC-04002
Objet Desktop 3-D Printer Site Preparation Guide
W × H × D (inch)
41 × 34.25 × 31
Table 2: Shipping pallet size and weight
Weight (kg/lb)
93 kg / 205 lb
8
Rev. D2