Physical Description; Configuration; Size And Weight; Start-Up Kit - Stratasys Objet24 V2 Site Preparation Manual

2 Physical Description

2.1 Configuration

The Objet 3‐D printing system consists of the following main components:
• The printer
• The printer computer (built into the printer)
• A printer‐server workstation (computer provided by the customer)

2.2 Size and Weight

The following table shows the size and weight information for the printer.
W × H × D (cm)
82.6 × 60 × 62
• W = Width; H = Height; D = Depth
• The weight of the printer does not include printing materials.

2.3 Start-Up Kit

The printer comes equipped with a start‐up kit, which includes tools and
accessories. These tools and accessories may be required during the
installation and are available for use by the customer.
DOC-04002
Objet Desktop 3-D Printer Site Preparation Guide
Figure 2–1 Objet 3-D printer
W × H × D (inch)
32.5 × 23.6 × 24.4
Table 1: Printer size and weight
6
Weight (kg/lb)
83 kg / 183 lb
Rev. D2