3.4 Unloading Space
In order to select the correct type of truck to deliver the printer, the
presence or absence of a loading dock at the customer site must be
identified.
Check the route from the unloading location to the installation location
and make sure there are no obstructions.
3.5 Unloading Assistance
The customer must provide professional unloaders to unload the pallets
and transfer them to the site. The unloaders will assist the distributor's
personnel in unpacking the equipment.
3.6 Training
After the installation of the 3‐D printing system, an authorized Stratasys
customer support engineer will train an operator and supervise the
operation of the printer (1½ work days). The printer operator needs to be
available during the entire installation and training period—two work
days.
DOC-04002
Objet Desktop 3-D Printer Site Preparation Guide
9
Rev. D2