To set the VLAN ID:
1.
From the Network setting menu, press
press zSELECT.
2.
On the VLAN ID menu, press
3.
Press
and enter the WAN VID. Use the dial pad and the
characters. The valid range is 0 to 4095.
4.
Press
and then press
5. Press
and enter the PC port number. Use the dial pad and the
enter characters. The valid range is 0 to 4095.
6.
Press
Save
Business IP Range Administration and Provisioning Guide
or
VLAN ID
WAN VLan:
Disabled
WAN VID:
0
PC VLan:
Disabled
PC VID:
0
Cancel
or
to enable or disable the PC port VLan.
to highlight VLAN ID, and then
or
to enable or disable the WAN VLan.
Save
soft key to enter
Backspc
soft key to
Backspc
ed 2.2
84/247