Alcatel Temporis IP150 Administration And Provisioning Manual page 117

The above operations are server dependent. The server has to support all of the following
with Call Park to make one-button operation possible:
 Monitoring a park orbit as an extension via BLF subscription (rfc4235)
 Remote BLF pickup via one of the two pickup options:
-New call via SIP INVITE
-Dialog based via SIP INVITE with REPLACE
 Parking an active call via blind transfer to a park orbit.
Other Settings
All settings in this section refer to desk top phones only, not to IP2015 IP DECT system.
Setting
LCD Contrast Level
user_pref.lcd_constrast
Backlight level (non idle)
user_pref.backlight
Backlight level (idle)
user_pref.idle_backlight
Live dial to idle timeout
(secs.)
user_pref.absent_timeout
Idle to logo timeout
user_pref.idle_to_logo_timeout
Logo to idle timeout
user_pref.logo_to_idle_timeout
Business IP Range Administration and Provisioning Guide
Description
Sets the contrast for the
LCD display.
Enables or disables the
backlight for non idle
mode, i.e, during user
operation.
Enables or disables the
backlight in idle state.
Sets the timeout (in
seconds) after which
live dial interface will
return to idle if there
are no more dialled
digits.
Sets the timeout to
switch from idle screen
to the customized (or
standard) logo display
Sets the timeout to
switch from logo to idle
screen
Range
1–7
off, low, middle, high
off, low, middle, high
10–60 (seconds)
0-300
(seconds)
0 means no logo will be
displayed
1-300
(seconds)
ed 2.2 117/247
Default
4
high
off
30
30
60