Alcatel Temporis IP150 Administration And Provisioning Manual page 83


6. Press and enter the IP address for the secondary DNS server. The phone will use
this server if the primary server does not respond.
7. Press Save softkey
To set static DNS:
1. From the Network setting menu, press
(whichever is in use in Static mode), and then press SELECT.
2. Highlight Set static DNS and then press SELECT.
The Set static DNS menu appears.
3. On the Set static DNS menu, press

4. Press and then enter the IP address for the primary DNS server.

5. Press and then enter the IP address for the secondary DNS server.
6. Press
Save
To set PPPoE:
1. From the Network setting menu, press
PPPoE mode), and then press SELECT.
2. Highlight Set PPPoE and then press SELECT. The Set PPPoE menu appears.
3. On the Set PPPoE menu, enter the PPPoE account Username.
4. Press  and then press
5. Enter a password, if you are required to enter a PPPoE password.
6. Press
Save
Business IP Range Administration and Provisioning Guide
Set static DNS
Static DNS: Disabled
DNS 1:
DNS 2:
Cancel
Set PPPoE
Username:
Password:
Cancel Backspc ABC
if you are required to enter a PPPoE account.
Edit
 
to highlight IPv4 or IPv6
or
Save
 
to set Static DNS to Enabled.
or
or to highlight IPv4 (which must be in
Save
ed 2.2 83/247