Alcatel Temporis IP150 Administration And Provisioning Manual page 131

Multicast Port
page_zone.x.multicast_port
(x= page zone ID number, 1 to 10)
Priority
page_zone.x.priority
(x= page zone ID number, 1 to 10)
Call priority threshold
page_zone.call_priority_threshold
Enable incoming page
page_zone.x.accept_incoming_page
(x= page zone ID number, 1 to 10)
Business IP Range Administration and Provisioning Guide
Enter the multicast port
used by the multicast
IP address. The valid
port range is 1 to
65535.
Select the paging zone
priority from 1 to 10.
Zones with a priority
higher than another
zone can interrupt the
lower-priority zone's
active page.
This priority setting
also ranges from 1 to
10. If the paging zone
priority is higher or
equal to the call
priority, then a
multicast page can
interrupt an active,
dialing, or incoming
call.
Select to enable the
deskset to receive
incoming pages for that
paging zone. If the
"Enable Incoming
Page" checkbox is not
selected, the phone will
not listen for the
multicast, but will still
be able to broadcast an
outgoing page.
0-65535 blank
1-10 5
1-10 2
0: disabled 1
1: enabled
ed 2.2 131/247