Deregister a DECT headset without a deskset
You can use this method when you cannot use the deskset for standard deregistration. The
deskset may be out of range or may have been removed from the system.
On the headset, press VOL+>ON/OFF>VOL->ON/OFF>VOL+>VOL->ON/OFF
Deskset functionality with an IP70H DECT headset
With IP70H registered to IP300, IP301G, IP700G or IP701G, users can:
Take the line to place a call in headset mode , or predial and launch the call in
headset mode, with IP70H ON/OFF button, or deskset
Receive incoming calls and call waiting tone signalling on the headset
Answer a call in headset mode, by pressing. IP70H ON/OFF button, or deskset key
Toggle between two calls by long pressing MUTE key on the headset
Navigate through calls with the usual call selection methods on the deskset, while
keeping audio on the cordless headset
Switch to handset or hands free mode anytime during the call
For more instructions please see IP70H Quick User guide.
Setting up IP300/IP301G/IP700G/IP701G with IP15 accessory
DECT handset
Temporis IP300, IP301G, IP700G and IP701G desksets embed a DECT base which
allows you to use compatible DECT accessories. You can register and use up to one IP70H
accessory headset and one IP15 accessory handset.
Note MMI options are the same for IP30x and IP70xG despite the different display size.
Thus pictures show IP300 or IP301G but can be used as reference for IP700G or IP701G as
well.
Register a DECT handset
1. When the phone is idle, press MENU.
2. On the Main menu, press or to highlight 3.User Settings, then press OK. The User
Settings menu appears.
3. On the User settings menu, press or to highlight 6.DECT handset, then press OK.
4. Set your handset to registration mode using the menu (Menu>User
settings>Registration)
Business IP Range Administration and Provisioning Guide
key
ed 2.2
51/247