Alcatel Temporis IP150 Administration And Provisioning Manual page 148

network.vlan.pc.id
Priority
network.vlan.pc.priority
LLDP-MED
Setting
Enable LLDP-MED
network.lldp_med.enable
Packet Interval (secs)
network.lldp_med.interval
802.1x
Setting
Enable 802.1x
network.eapol.enable
Identity
network.eapol.identity
Business IP Range Administration and Provisioning Guide
Enter the PC Port VLAN ID (vlan 5,
for example).
Not applicable to IP100,
IP2015/IP2115 or IP1850
Select the VLAN priority that
matches the Quality of Service
(QoS) settings that you have set
for that VLAN ID. Outbound
packets will be marked and sent
according to their priority. 7 is the
highest priority. Not applicable to
IP100, IP2015/IP2115 or IP1850
Note: Configuring the QoS settings
for your router or switch is a
subject outside the scope of this
document.
Description
Enables or disables LLDP-MED on
the phone. Select (enable) if your
switch is LLDP-MED capable.
Link Layer Discovery Protocol for
Media Endpoint Devices (LLDP-
MED) is a standards-based
discovery protocol supported on
some network switches.
It is required for auto-
configuration with VLAN settings.
Enter here the interval in seconds
between LLDP packets.
Description
Enables the 802.1X authentication
protocol. This provides the phone
with secure access to the network
when an 802.1X compliant
authentication server is used.
Consult your service provider.
Enter the 802.1x EAPOL identity.
0–7 0
Range Default
0:Disabled 1
1: Enabled
1–30 30
Range Default
0:Disabled 0
1: Enabled
string blank
ed 2.2 148/247