Alcatel Temporis IP150 Administration And Provisioning Manual page 179

You can export all the settings you have configured on the WebUI and save them as a
configuration file on your computer. You can then use this configuration file as a backup,
or use it to update other phones.
To export the configuration file:
1. Click Export.
The format of the exported file is <model name>_<mac address>.cfg. For example,
Temporis_IP300_7465D1161234.cfg.
Exporting a configuration file generates two header lines in the configuration file. These
header lines provide the model number and software version in the following format:
#Model Number = xxxxxxx
#SW Version = xxxxxxx
You can use the exported file as a general configuration file, and duplicate the settings
across multiple units. However, ensure that you edit the file to remove any unit-specific
SIP account settings before applying the file to other units.
Please note passwords are NOT exported, for security reasons. Namespaces will be
shown on the exported file, but with an empty value. Make sure to populate them again
if you wish to reuse to propagate the settings to other units.
Reset Configuration
To reset the phone to its default configuration:
Under Reset Configuration, click Reset.
Business IP Range Administration and Provisioning Guide ed 2.2 179/247