Locking Procedure - Karma Morgan Series User Manual

17.7. locking procedure:

First, make sure the leg rests are not colliding with the ramp or the docking station when entering the
vehicle. Now drive the wheelchair slowly into the vehicle and make sure you center your wheelchair in the
middle of the docking module. If well positioned the locking system will also guide the wheelchair into the
docking station. keep in slowly driving until you feel the wheelchair is hitting the end position in the
docking station. At the same time, you will hear a clicking sound. The wheelchair is now locked in to the
docking station. the light on the control panel will light up de LED showing the wheelchair is locked in
correctly. Now switch the wheelchair off.
WARNING
If the wheelchair is not centered correctly, it might not be possible to lock in top the docking
station. In that case, retry by driving a bit backwards and re-center the wheelchair. try once
more until you hear the clicking sound and you see the locked sign LED on.
After the wheelchair is locked in, put the car safety belt on according to the instruction in chapters "safety
belt".
WARNING
Do not forget to put the car safety belts on before driving in the vehicle. This on order to avoid
dangerous situations and personal- or wheelchair damage.
86