Karma Morgan Series User Manual page 51

Figure 5.3.7-1
When putting the armrest back to the working position, be sure part A is properly inserted into part B. Turn
the lock pin in 90 degree and make sure the armrest is properly installed. (Figure 5.3.7-3).
Use the #4 Allen Key Wrench and the #10 box end Wrench to remove the screws. Adjust the armrest height
and re-tighten the screws. (Figure 5.3.7-4).
Use the #5 Allen Key Wrench to loosen the screw. Adjust the base block forwards or backwards and re-
tighten the screw. (Figure 5.3.7-5).
Use the #4 Allen Key Wrench and the #10 box end Wrench to remove the screws and nuts. Adjust the
armrest to accommodate the user's arm position and flexibility (Figure 5.3.7-6). Re-tighten the screws.
Use the #3 Allen Key Wrench to loosen the screws. Adjust the armrest pad forwards or backwards and re-
tighten the screw. (Figure 5.3.7-7).
Recline the seat by operating the joystick after completing all of the adjustments. Be sure the movement of
armrest is proper and smooth.
Figure 5.3.7-3
Figure 5.3.7-6
Figure 5.3.7-2
Figure 5.3.7-4
Figure 5.3.7-7
Figure 5.3.7-5
Figure 5.3.8-1
51